Fit testing
The Control of Substances Hazardous to Health Regulations 2002 (COSHH) includes a legal requirement for workers using respiratory protective equipment (RPE), to have it fit tested by a competent person.
Fit testing is required to ensure that RPE provides adequate protection for the wearer. Masks and similar equipment rely on a good seal being achieved against the face. Any gaps around the seal will allow air to leak through.
A leading cause of leaks in RPE is facepieces that are poorly fitted. Fit testing helps ensure the most suitable type and size is selected for each individual.
Facial hair makes it more difficult, and in some cases impossible, to achieve a good seal. In such cases, alternative forms of RPE that do not rely on such a tight seal should be used.
Steps should be taken to ensure that the person conducting the RPE fit testing has been appropriately trained and qualified. The British Safety Industry Federation (BSIF), together with HSE and other industry stakeholders, have developed a competency scheme, Fit2Fit REP Fit Test Provider Accreditation Scheme.
NB in 2017, the Health and Safety Executive carried out tests on a number of filtering facepieces. Just five passed all the tests with no faults or failures:
- Two models had an isolated fault on a single sample.
- Three models had multiple faults, two of them serious.
- Four of the manufacturers included no, or limited, information on pre-use checks.
For more information see: Performance of FFP3 disposable respirators.
[edit] Related articles on Designing Buildings Wiki
- Air quality.
- Construction dust.
- Control of Substances Hazardous to Health (COSHH).
- Dust control systems.
- Ergonomics in construction.
- Filtering facepieces.
- First aider.
- Leaks in buildings.
- Performance of FFP3 disposable respirators.
- Personal protective equipment.
- Pollution.
- Site induction.
- The dust control systems market.
Featured articles and news
CIOB student competitive construction challenge Ireland
Inspiring a new wave of Irish construction professionals.
Challenges of the net zero transition in Scotland
Skills shortage and ageing workforce hampering Scottish transition to net zero.
Private rental sector, living standards and fuel poverty
Report from the NRH in partnership with Impact on Urban Health.
.Cold chain condensing units market update
Tracking the evolution of commercial refrigeration unit markets.
Attending a conservation training course, personal account
The benefits of further learning for professsionals.
Restoring Alexander Pope's grotto
The only surviving part of his villa in Twickenham.
International Women's Day 8 March, 2025
Accelerating Action for For ALL Women and Girls: Rights. Equality. Empowerment.
Lack of construction careers advice threatens housing targets
CIOB warning on Government plans to accelerate housebuilding and development.
Shelter from the storm in Ukraine
Ukraine’s architects paving the path to recovery.
BSRIA market intelligence division key appointment
Lisa Wiltshire to lead rapidly growing Market Intelligence division.
A blueprint for construction’s sustainability efforts
Practical steps to achieve the United Nations Sustainable Development Goals.
Timber in Construction Roadmap
Ambitious plans from the Government to increase the use of timber in construction.
ECA digital series unveils road to net-zero.
Retrofit and Decarbonisation framework N9 launched
Aligned with LHCPG social value strategy and the Gold Standard.
Competence framework for sustainability
In the built environment launched by CIC and the Edge.
Institute of Roofing members welcomed into CIOB
IoR members transition to CIOB membership based on individual expertise and qualifications.
Join the Building Safety Linkedin group to stay up-to-date and join the debate.
Government responds to the final Grenfell Inquiry report
A with a brief summary with reactions to their response.